Gast PCD Manuale Utente Scaricare il pdf

OIL-LESS PISTON

VACUUM PUMPS & COMPRESSORS

OPERATION & MAINTENANCE MANUAL

IMPORTANT: PLEASE READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE.

Thank you for purchasing this Gast product. It is manufactured to the highest standards

using quality materials. Please follow all recommended maintenance, operational

and safety instructions and you will receive years of trouble free service.

www.gastmfg.com

ISO 9001 & 14001 CERTIFIED

PART NO. 70 - 2100 G441PL (REV-L)

Model 1HAB Shown

Product Use Criteria:

• Pump only clean, dry air.

• Operate at 32ºF - 104ºF (0ºC - 40ºC).

• Protect unit from dirt & moisture.

• Do not pump flammable or explosive gases or

use in an atmosphere that contains such gases.

• Protect all surrounding items from exhaust air. This

exhaust air can become very hot.

• Corrosive gases and particulate material will damage unit.

Water vapor, oil-based contaminants or other liquids must be filtered out.

• Consult your Gast Distributor/Representative before using at high altitudes.

• These pumps are oil-less and require NO lubrication.

The Teflon-filled rings are self-lubricating and require no oil.

• The motor bearings are grease-packed for the lifetime of the bearings.

Model 3HBB Shown Model 3HEB Shown Model PCD Shown

1 2 3 4 5 6 ... 15 16

Sommario

Pagina 1 - OIL-LESS PISTON

OIL-LESS PISTONVACUUM PUMPS & COMPRESSORSOPERATION & MAINTENANCE MANUALIMPORTANT: PLEASE READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE.Thank

Pagina 2 - INSTALLATION

VBB – PCA-10 SERIESModels PAB and PBB shown.** Item not shown.∆ Denotes parts included in the Service Kit.Parts listed are for stock models. For spec

Pagina 3 - Injury Hazard

EXPLODED PRODUCT VIEWS – MODEL PAB (TOP) & MODEL PBB (BOTTOM)

Pagina 4 - SHUTDOWN PROCEDURES

PARTS & ORDERING INFORMATIONREF DESCRIPTION QTY 5VDF 5VSF 6LCF ** 6HDK 7LDE 7HDD 7HDE 8HDM 8HDN 8LDF1 INLET FILTER ASSEMBLY

Pagina 5 - SERVICE KIT INSTALLATION

EXPLODED PRODUCT VIEW – MODEL 5VDF

Pagina 6 - 1HAA / 1HAB SERIES

Gast finished products, when properly installed and operated under normal conditions of use, are warranted by Gast tobe free from defects in material

Pagina 7

MAINTENANCE RECORDDATE PROCEDURE PERFORMED

Pagina 8 - 4VCF – 6HCA SERIES

TROUBLESHOOTING CHARTwww.gastmfg.comISO 9001 & 14001 CERTIFIEDLow High Pump Motor Excess Reason and remedyVacuum Pressure Vacuum Pressure Overheat

Pagina 9

Motor ControlIt is your responsibility to contact a qualifiedelectrician and assure that the electrical installationis adequate and in conformance wit

Pagina 10 - PAB – VAB SERIES

Model with a power supply cord:This product must be grounded. For either 120-volt or220/240-volt circuits connect power supply cordgrounding plug to

Pagina 11

It is your responsibility to: • Regularly inspect and make necessary repairs toproduct in order to maintain proper operation. • Make sure that pres

Pagina 12 - 5VDF – 8LDF SERIES

Check that all external accessories such as reliefvalves and gauges are attached to cover and arenot damaged before re-operating product.If pump still

Pagina 13

Air receiver loses pressure:1. Check for system leaks through pipes, fittings and seals.2. Inspect the check valve to see if it is allowing air pressu

Pagina 14 - DATE PROCEDURE PERFORMED

EXPLODED PRODUCT VIEW – MODEL 1HAB

Pagina 15

PARTS & ORDERING INFORMATIONREF DESCRIPTION QTY 1VBF 1VSF 2LBB 2HBB 2HBC 3HBB 3HBE 3LBA 3LBD1 INLET FILTER ASSEMBLY 1 B300A2 B300A B300A

Pagina 16 - TROUBLESHOOTING CHART

EXPLODED PRODUCT VIEW – MODEL 1VBF